Pseudo-dynamic buckling experiments on thin cylindrical shells under biaxial seismic loads

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamic buckling of thin cylindrical shells under axial impact

The dynamic buckling of thin isotropic thermoviscoplastic cylindrical shells compressed with a uniform axial velocity prescribed at the end faces is investigated analytically and numerically. In the first part of the paper, the stressed/deformed state of a shell is assumed to have buckled if infinitesimal perturbations superimposed upon it grow. Cubic algebraic equations are derived for both th...

متن کامل

Buckling of Stiffened Thin-Walled Cylindrical Shells under Axial Compression with Symmetrical Imperfections

This study aimed to investigate the effects of stiffeners on buckling of thin cylindrical shells under uniform axial compression. To this end, more than 300 finite element models of stiffened cylindrical shells were prepared. The variables considered are shell thickness, number, dimension and the location of the vertical and horizontal stiffeners as well as circular symmetrical imperfections. R...

متن کامل

Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression

Linear eigenvalue analysis of cracked cylindrical shells under combined internal pressure and axial compression is carried out to study the effect of crack type, size and orientation on the buckling behavior of cylindrical thin shells. Two types of crack are considered; through crack and thumbnail crack. Our calculations indicate that depending on the crack type, length, orientation and the int...

متن کامل

Knockdown factors for buckling of cylindrical and spherical shells subject to reduced biaxial membrane stress

Cylindrical shells under uniaxial compression and spherical shells under equi-biaxial compression display the most extreme buckling sensitivity to imperfections. In engineering practice, the reduction of load carrying capacity due to imperfections is usually addressed by use of a knockdown factor to lower the critical buckling stress estimated or computed without accounting for imperfections. F...

متن کامل

Buckling and Postbuckling Analysis of Shells under Quasi-static and Dynamic Loads

With dynamic loading like landing impact a distinction should be made between relatively short and long, quasistatic loading durations, and loadings the durations of which are in the order of the longest lateral period (lowest eigenfrequency) of the structure. A particular problem is to be expected under the later loadings where the interaction of loading dynamics with the dynamics of the buckl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Nuclear Engineering and Design

سال: 1995

ISSN: 0029-5493

DOI: 10.1016/0029-5493(95)00983-j