Prototype of Self-Sensing Magnetic Bearing for Liquid Nitrogen Pump
نویسندگان
چکیده
منابع مشابه
Robustness of Self-Sensing Magnetic Bearing
Self-sensing magnetic bearings work without position sensors. The position measurement, which is required by the controller, can be deduced from the electromagnetic interaction between stator and rotor. The self-sensing method discussed in this paper is based on controlling the voltage over the coils and measuring the current through the coils. This method can be realized with a minimal amount ...
متن کاملA Self-Sensing Homopolar Magnetic Bearing: Analysis and Experimental Results
One of the chief obstacles to constructing a reliable, low-cost, practical magnetic bearing is designing a suitable position sensor. A homopolar magnetic bearing that uses the same coils to stabilize the rotor and sense its position is introduced. A prototype bearing has been built and successfully used to stabilize a rotor. The electromagnetic analysis of the self-sensing function, the impleme...
متن کاملA Compact Magnetic Bearing System for Axial Flow Blood Pump
In this paper, a compact magnetic bearing system has been developed for axial flow blood pumps. The system is composed of two radial hybrid magnetic bearings (HMBs) and a brushless permanent magnet DC motor. The impeller of the pump is enclosed in the rotor that is suspended by the two HMBs with five-degree of freedom (DOF) control, among which four radial directions are actively controlled, an...
متن کاملA Self-Sensing Active Magnetic Bearing Based on a Direct Current Measurement Approach
Active magnetic bearings (AMBs) have become a key technology in various industrial applications. Self-sensing AMBs provide an integrated sensorless solution for position estimation, consolidating the sensing and actuating functions into a single electromagnetic transducer. The approach aims to reduce possible hardware failure points, production costs, and system complexity. Despite these advant...
متن کاملOptimization of a Hybrid Magnetic Bearing for a Magnetically Levitated Blood Pump via 3-D FEA.
In order to improve the performance of a magnetically levitated (maglev) axial flow blood pump, three-dimensional (3-D) finite element analysis (FEA) was used to optimize the design of a hybrid magnetic bearing (HMB). Radial, axial, and current stiffness of multiple design variations of the HMB were calculated using a 3-D FEA package and verified by experimental results. As compared with the or...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 2006
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.126.1293