Proses Perbaikan Plate Heat Exchanger Tipe M15 di PT. Janata Marina Indah (JMI) Semarang
نویسندگان
چکیده
منابع مشابه
Analysis of Heat Transfer Enhancement in Spiral Plate Heat Exchanger
In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...
متن کاملAnalysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid
A heat exchanger using nanofluid needs to operate at optimum mass concentration level to get the maximum heat transfer performance. A numerical analysis is performed on the heat transfer and pressure drop of water-based γ-Al2O3 nanofluid gasketed-plate heat exchanger to specify its optimum conditions. Cold water will be heated by γ-Al2O3/water nanofluid. The results showed that optimal volume c...
متن کاملHeat Transfer Analysis of Nanofluid in a Sine Wave Plate Heat Exchanger
Heat transfer is one of the most critical processes in the industry, and by increasing the efficiency of the heat exchanger, energy consumption of systems will be reduced. Very tiny particles in nanoscale dimensions, when uniformly dispersed and stably suspended in the base fluid, efficiently improve the thermal properties of the base fluid. With the help of nanofluids, the heat transfer rate i...
متن کاملCalculation of Heat Transfer Coefficient of MWCNT-TiO2 Nanofluid in Plate Heat Exchanger
The objective of the present study is the synthesis of MWCNT-TiO2 hybrid nanostructures by solvothermal synthesis method with TiCl4 as precursor. The heat transfer enhancement due to the use of MWCNT-TiO2 nanofluid was investigated. As-prepared hybrid materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that MWCNTs were uniformly dec...
متن کاملHeat transfer enhancement in a spiral plate heat exchanger model using continuous rods
This study presents an innovative and simple way to increase the rate of heat transfer in a spiral plate heat exchanger model. Several circular cross-section rods, as continuous vortex generators, have been inserted within the spiral plate heat exchanger in the cross-stream plane. The vortex generators are located at various azimuth angles of α=30◦, 60◦, 90◦, and 120◦ with non-dimensional diame...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zona Laut : Jurnal Inovasi Sains Dan Teknologi Kelautan
سال: 2020
ISSN: 2721-5717,2747-2124
DOI: 10.20956/zl.v1i1.9651