Proposal to Standardize Fatigue Delamination Growth Tests Using Double Cantilever Beam Specimens without Fibre Bridging
نویسندگان
چکیده
منابع مشابه
Automatic Optical Crack Tracking for Double Cantilever Beam Specimens
1 Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 2 Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, Urbana, IL 3 Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 4 Department of Aerospace Engineering, University of Illinois at Urbana...
متن کاملUse of a surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test A.R.Sanderson
A surface-mounted chirped fibre Bragg grating (CFBG) sensor has been used for the first time to monitor delamination growth within a composite material (a transparent, unidirectionally reinforced glass fibre/epoxy resin double-cantilever beam (DCB) specimen). The specimens were tested using a constant displacement rate, with the delamination length being measured using complementary techniques:...
متن کاملProposal to adapt the WASP programme to fibre counting tests.
We welcome the opportunity to respond to the comments by B. Préat on our study involving the possible adaptation of the Workplace Analysis Scheme for Proficiency (WASP) Programme to fibre counting tests (Préat, 2006; Grzebyk et al., 2005). (i) In Method 1, operator classification is based on the mean and coefficient of variation of standardized results (results obtained by operators divided by ...
متن کاملDentin erosion simulation by cantilever beam fatigue and pH change.
Exposed root surfaces frequently exhibit non-carious notches representing material loss by abrasion, erosion, and/or abfraction. Although a contribution from mechanical stress is often mentioned, no definitive proof exists of a cause-effect relationship. To address this, we examined dimensional changes in dentin subjected to cyclic fatigue in two different pH environments. Human dentin cantilev...
متن کاملShape Control And Optimization Using Cantilever Beam
In this study, Analytical work is carried out for static shape control of cantilever beam structure with a use of laminated piezoelectric actuator (LPA). The mathematical modeling of beam element covered with LPA based on Timoshenko beam element theory and linear theory of piezoelectricity has been used. This work shows how number of actuators, actuator size, actuator location on beam and contr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings
سال: 2018
ISSN: 2504-3900
DOI: 10.3390/icem18-05194