Property of Composite Silicide from Nickel Cobalt Alloy
نویسندگان
چکیده
منابع مشابه
Growth of single-crystalline cobalt silicide nanowires and their field emission property
In this work, cobalt silicide nanowires were synthesized by chemical vapor deposition processes on Si (100) substrates with anhydrous cobalt chloride (CoCl2) as precursors. Processing parameters, including the temperature of Si (100) substrates, the gas flow rate, and the pressure of reactions were varied and studied; additionally, the physical properties of the cobalt silicide nanowires were m...
متن کاملOptimizing the Formation of Nickel Silicide
A review of the formation processes for nickel silicide is given to assess the limitations of using the silicide for sub-65 nanometer technologies. Various aspects attributed to the NiSi formation process are described and addressed by using a two-step process sequence for annealing. The focus of this study was to develop a process sequence with three principal steps to achieve low resistivity ...
متن کاملComposition tunable cobalt–nickel and cobalt–iron alloy nanoparticles below 10 nm synthesized using acetonated cobalt carbonyl
A general organometallic route has been developed to synthesize Co(x)Ni(1-x) and Co(x)Fe(1-x) alloy nanoparticles with a fully tunable composition and a size of 4-10 nm with high yield. In contrast to previously reported synthesis methods using dicobalt octacarbonyl (Co(2)(CO)(8)), here the cobalt-cobalt bond in the carbonyl complex is first broken with anhydrous acetone. The acetonated compoun...
متن کاملFormation of Nickel Silicide from Direct-Liquid-Injection Chemical-Vapor-Deposited Nickel Nitride Films
Formation of Nickel Silicide from Direct-Liquid-Injection Chemical-Vapor-Deposited Nickel Nitride Films Zhefeng Li, Roy G. Gordon,* Huazhi Li, Deo V. Shenai, and Christian Lavoie Department of Chemistry and Chemical Biology, Harvard University, Cambridge, Massachusetts 02138, USA Dow Electronic Materials, North Andover, Massachusetts 01845, USA IBM, Thomas J. Watson Research Center, Yorktown He...
متن کاملEffect of tantalum additions to a cobalt-chromium-nickel base alloy.
The effect of additions of tantalum (Ta) to a 40-30-30 cobalt (Co) -chromium (Cr) nickel (Ni) alloy has been studied for several years at the University of Michigan. Mechanical properties of a series of these alloys have been reported by Mohammed and Asgar.1 Those results showed that an alloy containing 13% Ta would have an ultimate tensile strength of 124,000 psi, a yield strength of 90,000 ps...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2007
ISSN: 1225-0562
DOI: 10.3740/mrsk.2007.17.2.073