Properties of Special Polypropylene Fiber Grade Materials/Propylene-ethylene Copolymer Blends
نویسندگان
چکیده
Abstract Special propylene-ethylene copolymer (PEC) and polypropylene (PP) fiber grade materials were blended through the melt-compounding method to prepare PP/PEC blends in varying proportions. Subsequently, further analysis was carried out on crystallinity, dispersibility, mechanical properties flexibility of blends. The results haven shown that PEC is uniformly dispersed PP matrix, whereas size particle relatively smaller. Moreover, as content increases, crystallization temperature ( T cp ) would experience increases accordingly. In addition, Young’s modulus tensile strength decreases with evident impact strength. Last but not least, softness a certain extent addition PEC.
منابع مشابه
Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کاملPolypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کاملMorphology and Mechanical Properties of Binary Blends of Polypropylene with Statistical and Block Ethylene-Octene Copolymers
In the present work, statistical (EOCs) and block (OBCs) ethylene-octene copolymers, with similar densities and crystallinities, were used as impact modifiers of isotactic polypropylene (iPP), and the toughening effects of these two types of elastomers were compared. The viscosity curves of EOCs were similar to those of OBCs with equivalent melt flow rate (MFR), enabling a comparison of the vis...
متن کاملpolypropylene /polystyrene in situ nano reinforced blends fiber: morphology and properties
polypropylene / polystyrene blends containing montmorillonite (mmt) were prepared using a twin screw extruder followed by fiber spinning. the melt intercalation of pp and ps alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (mpp). the crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (pp/ps) nan...
متن کاملInfluence of Heterogeneous Textures of Polypropylene/Ethylene-Propylene-Rubber Blends on Dynamic Viscoelastic Properties in Molten State
Heterogeneous textures due to phase separation in molten polypropylene (PP)/ ethylene-propylene-rubber (EPR) blends were investigated in relation to their dynamic viscoelastic properties. As characteristic to heterogeneous liquids, slow relaxation mechanisms due to the existence of such phases were found for dynamic moduli of PP/EPR blends. These moduli were analyzed by using the linear viscoel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2023
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2460/1/012110