Properties of High Speed Steels Produced by Metal Injection Molding.
نویسندگان
چکیده
منابع مشابه
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding
Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملProgress in Titanium Metal Powder Injection Molding
Metal powder injection molding is a shaping technology that has achieved solid scientific underpinnings. It is from this science base that recent progress has occurred in titanium powder injection molding. Much of the progress awaited development of the required particles with specific characteristics of particle size, particle shape, and purity. The production of titanium components by injecti...
متن کاملPVT Properties of Polymers for Injection Molding
PVT (Pressure-Volume-Temperature) properties of polymers are important for both engineering and polymer physics. Fig.1 shows the typical PVT diagrams of an amorphous (a) and semi-crystalline polymer (b). PVT diagram describes the specific volume as a function of pressure and temperature. Specific volume increases with the temperature increasing. There is a thermal transition in the polymer. The...
متن کاملEvaluation of dissimilar joint properties of AISI316 to AISI430 stainless steels produced by GTAW
In this research, microstructure and mechanical properties of AISI316 to AISI430 dissimilar joint were investigated. For this purpose, GTAW process using ER316L and ER2209 filler metals with diameter of 2.4 mm was used. The microstructure and fracture surface of the welded samples were characterized by optical microscopy and scanning electron microscopy. Also the mechanical properties of the we...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]
سال: 1994
ISSN: 1883-4558,0011-8389
DOI: 10.4262/denkiseiko.65.91