Properties of atomic layer deposited iron oxide and bismuth oxide chloride structures
نویسندگان
چکیده
منابع مشابه
Capacitance-voltage Characterization of Atomic-Layer-Deposited Al2O3/InGaAs and Al2O3/GaAs Metal –Oxide-Semiconductor Structures
ALD Al2O3/GaAs and Al2O3/In0.2Ga0.8As MOS and source-drain implanted MOSFET structure were fabricated and characterized by capacitance-voltage (CV) and current-voltage (I-V) measurements. It is shown that, after high-temperature anneal, the MOS leakage current density of the thinner (16nm) film is much higher than that of the thicker (30nm) film. The highquality Al2O3 (30nm)/In0.2Ga0.8As interf...
متن کاملAtomic-layer-deposited LaAlO3/SrTiO3 all oxide field-effect transistors
We have demonstrated well-behaved accumulation-mode all oxide NMOSFETs with amorphous atomic-layer-deposited (ALD) LaAlO3 gate dielectric stacks on crystalline SrTiO3 substrates. A maximum drain current exceeding 10 mA/mm has been obtained on a 3.75μm-gate-length device, proving a very conductive channel can be formed at the oxide-oxide interface. Four different gate dielectric stacks, which ar...
متن کاملElectrical properties of atomic layer deposited aluminum oxide on gallium nitride
We report on our investigation of the electrical properties of metal/Al2O3/GaN metal-insulatorsemiconductor capacitors. We determined the conduction band offset and interface charge density of the alumina/GaN interface by analyzing the capacitance-voltage characteristics of atomic layer deposited Al2O3 films on GaN substrates. The conduction band offset at the Al2O3/GaN interface was calculated...
متن کاملAtomic layer deposited zinc tin oxide channel for amorphous oxide thin film transistors
Bottom-gate thin film transistors with amorphous zinc tin oxide channels were grown by atomic layer deposition. The films maintained their amorphous character up to temperatures over 500 C. The highest field effect mobility was 13 cm/V s with on-to-off ratios of drain current 10–10. The lowest subthreshold swing of 0.27 V/decade was observed with thermal oxide as a gate insulator. The channel l...
متن کاملGrain boundary structures of atomic layer deposited
Grain boundary plays an important role in determining the physical properties and chemical stability of the materials. In particular, the structures of grain boundaries in atomic layer deposited TiN film may be one of the main factors to dominate the reliability and performance of ULSI devices with multilayer structure of Cu-based interconnects. In this work, the characteristics of grain bounda...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Alloys and Compounds
سال: 2020
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2020.156099