Program Development for Detention Pond Sizing Based on Excel Using SWMM Engine
نویسندگان
چکیده
منابع مشابه
Hydrologic Modeling of Detention Pond
Urban watersheds produce an instantaneous response to rainfall. That results in stormwater runoff in excess of the capacity of drainage systems. The excess stormwater must be managed to prevent flooding and erosion of streams. Management can be achieved with the help of structural stormwater Best Management Practices (BMPs). Detention ponds is one such BMP commonly found in the Austin, TX, USA....
متن کاملDetention Basin Sizing for Small Urban Catchments
The Federal Aviation Administration (FAA) method for sizing small detention and retention basins is a volume-based approach that is sensitive to the release rate. In practice, such a release rate is often approximated by open channel hydraulics or culvert hydraulics. Without a consistent guideline, this practice of approximation can result in significant discrepancy or violation of the volume b...
متن کاملDetention Pond Phosphorus Loadings Uncertainty Using Fuzzy Logic
1 Abstract—This study vitalized the uncertainty and fuzzy rules consideration in the estimation of phosphorus loadings and eutrophication status of the hydrologic system namely detention pond using Fuzzy Logic (MATLAB). These methods were chosen to cater for the uncertainty of loading factors such as sediment and phosphorus inflow, inflowing discharge and pond storage volume. The average of pho...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولTitle: Managing very large EXCEL files using the XLS engine
The use of SAS V5 transport files, unfortunate, is still currently required for FDA submissions. Many users in the pharmaceutical industry, however, are not well versed on the structure or detemining the contents of transprort files. It is quite common for many of us to receive a SAS transport file from a vendor or a CRO. The first question is always – is it a .XPT file format or a .CPT file fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Hazard Mitigation
سال: 2020
ISSN: 1738-2424,2287-6723
DOI: 10.9798/kosham.2020.20.2.229