Productivity Improvement in Priming Shop by using Jig and Fixture

Design and Fabrication Testing of Combined Multipurpose Jig and Fixture

This proposed method has to design and fabricate the Multipurpose Jig and Fixture, for that component which has been to reduce the manufacturing cycle time. When the component produced on a small size previously this is to produces the large quantities of requirements. The selective components requires for machining operations such as step milling, angle milling & boring and reaming. The few op...

Rapid Manufacturing with Fdm in Jig & Fixture Construction

The weight of a device is an ergonomic criterion as well. Devices that are carried and operated by people may not exceed a weight of 5 kg (11 lbs.). Previously, this was achieved by using lowdensity materials, such as aluminum or polyamide. An additional weight reduction, however, can be obtained through the use of ABS plastics and the FDM process. The density differences of ABS and polyamide d...

Productivity Improvement through Line Balancing by Using Simulation Modeling

The typical problems facing garment manufacturers are long production lead time, bottlenecking, and low productivity. The most critical phase of garment manufacturing is the sewing phase, as it generally involves a number of operations or for the simple reason that it’s labor intensive. In assembly line balancing, allocation of jobs to machines is based on the objective of minimizing the workfl...

Productivity and priming: Morphemic decomposition in Arabic

Improvement of Solar Still Productivity by Energy Absorbing Plates

A solar still is a viable option when the demand of potable water does not exceed more than 3 litres. Enhancement in distillate output from the solar still is a main goal of many researchers all over the world. In this research, the effect of copper and aluminium plates on distillate output is investigated experimentally as well as theoretically at different water depths under the same climate ...