PRODUCTIVITY IMPROVEMENT IN FLUX ASSISTED TIG WELDING
نویسندگان
چکیده
منابع مشابه
Tig Welding Process Pdf
Tungsten inert gas (TIG) welding, also called as gas tungsten welding 1. (a) Schematic of TIG welding Process (b) Variety of tungsten electrodes. The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid. Tungsten inert gas welding, TIG is widely applied in manufacturing process for different The ...
متن کاملEffect of Activated Flux on Properties of SS 304 Using TIG Welding
In this experimental work, Manganese oxide (MnO2), Zinc oxide (ZnO), Iron oxide (Fe2O3) and Magnesium chloride (MgCl2) were used as activating flux to investigate the effects for SS 304 in tungsten inert gas (TIG) welding. Ultimate tensile strength, percentage elongation, Penetration depth and width were studied of material SS 304. The experimental results indicated that the MnO2 and Fe2O3 flux...
متن کاملInfluence of Electromagnetic Fields on Environment in TIG welding process
Primljeno (Recieved): 2011-07-13 Prihvaćeno (Accepted): 2011-11-15 Original scientific paper This paper presents welding current influence on spreading of electromagnetic field in TIG welding process. The quality of welding is analyzed by „Fast Fourier Transformation“ (FFT) on recorded current. Electric and magnetic field are measured using an instrument „Macshek ESM – 100 3D Fieldmeter“ [1]. W...
متن کاملStructure-property Interaction in Flux Assisted Tungsten Inert Gas Welding of Austenitic Stainless Steel
Austenitic stainless steel SS304 grade was welded with active Tungsten Inert Gas (TIG) welding process by applying a flux paste made of SiO2 powder and acetone. SiO2 flux application improves the weld bead depth with a simultaneous reduction in weld bead width. The improvement in penetration results from arc constriction and reversal of Marangoni convection. Experimental studies revealed that t...
متن کاملTIG Welding of Ti Alloys with In-Process Monitoring
Titanium alloys have found increased applications in various industrial sectors. One of the critical issues in quality control is the weld penetration during welding. In the present paper, tungsten inert gas (TIG) welding of Ti-6Al-4V alloy with and without an activating flux was conducted. The effect of the activating flux on Ti alloy welding was investigated. A data acquisition system was use...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal on Design and Manufacturing Technologies
سال: 2012
ISSN: 0973-9106
DOI: 10.18000/ijodam.70119