PRODUCTIVITY AND STRUCTURAL PERFORMANCE OF STEEL/PRECAST CONCRETE HYBRID STRUCTURAL SYSTEM USING FLAT-STEEL-PLATE-CONNECTIONS
نویسندگان
چکیده
منابع مشابه
Structural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls
composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...
متن کاملSeismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملEvaluation of Influence of Hole Making Upon the Performance of Structural Steel Plates and Connections
15. Supplementary Notes Project performed in cooperation with the Texas Department of Transportation and the Federal Highway Administration. Project title: Performance and Effects of Punched Holes and Cold Bending on Steel Bridge Fabrication 16. Abstract A large experimental study was undertaken to determine the effect of hole making upon the strength, ductility, and fatigue performance of stru...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 1999
ISSN: 1341-9463,1881-8188
DOI: 10.3130/aijt.5.157