Production of tungsten-fibre reinforced tungsten composites by a novel continuous chemical vapour deposition process
نویسندگان
چکیده
منابع مشابه
Real-time growth rate metrology for a tungsten chemical vapor deposition process by acoustic sensing
An acoustic sensor, the Leybold Inficon ComposerTM, was implemented downstream to a production-scale tungsten chemical vapor deposition cluster tool for in situ process sensing. Process gases were sampled at the outlet of the reactor chamber and compressed with a turbomolecular pump and mechanical pump from the sub-Torr process pressure regime to above 50 Torr as required for gas sound velocity...
متن کاملChemical Vapour Deposition for Optical Fibre Technology
At the beginning of the seventies, a break-through took place in the telecommunication research. The introduction of Chemical Vapour Deposition technology in the manufacture of optical fibres allowed both technical quality and economical convenience to realise optical networks, thus beginning the telecommunication revolution. Since that moment, a great development of the CVD techniques has been...
متن کاملTetragonal tungsten oxide nanobelts synthesized by chemical vapor deposition
Tungsten trioxide (WO3) nanobelts in tetragonal structure were grown on Si substrates by a hot-wall chemical vapor deposition (CVD) method without using catalysts. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, and photoluminescence (PL) spectrum. The width of the nanobelts is in the ran...
متن کاملModel Reduction for a Tungsten Chemical Vapor Deposition
A model of a tungsten chemical vapor deposition (CVD) system is developed to study the CVD system thermal dynamics and wafer temperature nonuniformities during a processing cycle. We develop a model for heat transfer in the system’s wafer/susceptor/guard ring assembly and discretize the modeling equation with a multiple-grid, nonlinear collocation technique. This weighted residual method is bas...
متن کاملGrowth of Thin Films of Molybdenum and Tungsten Oxides by Combustion Chemical Vapour Deposition using Aqueous Precursor Soluti
Using combustion chemical vapour deposition, layers of molybdenum and tungsten oxides have been deposited on glass and silicon at low temperatures. Inexpensive ammonium salts of molybdate and metatungstate ions were used as precursors and were delivered to the coating flame as an aqueous solution using a nebuliser. The resulting films were analysed by scanning electron microscopy (SEM), energy ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fusion Engineering and Design
سال: 2019
ISSN: 0920-3796
DOI: 10.1016/j.fusengdes.2019.02.097