Production of tubular porous hydroxyapatite using electrophoretic deposition
نویسندگان
چکیده
منابع مشابه
Electrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملelectrophoretic deposition of hydroxyapatite
the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...
متن کاملElectrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications
The basic calcium phosphate mineral, hydroxyapatite (HAP) (Ca10(PO4)6(OH)2)), is the prototype of one of the major constituents of bone and teeth. Thin layers of HAP were coated on the surface of type 316L stainless steel by electrophoretic deposition (EPD) from a 2.5% suspension in isopropyl alcohol, and this was followed by vacuum sintering at 800uC for 1 h. The development of HAP coatings wa...
متن کاملElectrophoretic Deposition of Hydroxyapatite Film Containing Re-Doped MoS2 Nanoparticles
Films combining hydroxyapatite (HA) with minute amounts (ca. 1 weight %) of (rhenium doped) fullerene-like MoS₂ (IF) nanoparticles were deposited onto porous titanium substrate through electrophoretic process (EPD). The films were analyzed by scanning electron microscopy (SEM), X-ray diffraction and Raman spectroscopy. The SEM analysis showed relatively uniform coatings of the HA + IF on the ti...
متن کاملNano-Hydroxyapatite Coated Acetabular Cup Implant by Electrophoretic Deposition
A nanostructural hydroxyapatite (HA) coating was deposited to the porous Ti6Al4V acetabular cup implants using a room temperature electrophoretic deposition (EPD) process in order to achieve the improved bonding strength between the implants and cells, fast healing, good corrosion resistance and long-term stability after implantation. The micropores created in the coating will improve the bioac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2012
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.120.569