Production of Thermoplastic Composite Filaments for Additive Manufacturing using Recycled Carbon Fibers
نویسندگان
چکیده
منابع مشابه
Composite Fibers from Recycled Plastics Using Melt Centrifugal Spinning
New methods are being developed to enable the production of value-added materials from high-volume, low-cost feedstocks arising from domestic recycling streams. In this work, recycled bottle-grade polyethylene terephthalate, polystyrene, and polypropylene were spun into fibers from the melt using a centrifugal spinning technique. Mono-component fibers and 50/50 blends of each polymer and a 33/3...
متن کاملComparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials
This review provides a comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials. Carbon filaments (0.1 mm diameter, catalytically grown) are superior to conventional carbon fibers (discontinuous) as a filler in providing polymer–matrix and cement–matrix composites for electromagnetic performance, but are inferior to the fibers as a fille...
متن کاملNanotube Composite Carbon Fibers
The mechanical properties of materials in small rod-shaped form are of considerable technological interest since, due to their shape and size, they can exhibit appreciably greater strength relative to corresponding macroscopic forms. For example, the mechanical strength of silicon carbide whiskers systematically increases with decreasing whisker diameter over the 100 to 1 micron range. This phe...
متن کاملCharacterization of Thermoplastic Polyurethane (TPU) and Ag-Carbon Black TPU Nanocomposite for Potential Application in Additive Manufacturing
Electromechanical, adhesion, and viscoelastic properties of polymers and polymer nanocomposites (PNCs) are of interest for additive manufacturing (AM) and flexible electronics. Development/optimization of inks for AM is complex, expensive, and substrate/interface dependent. This study investigates properties of free standing films of a thermoplastic polyurethane (TPU) polymer and an Ag–carbon b...
متن کاملPrecursors and Manufacturing of Carbon Fibers
In this chapter, we will present the precursors and manufacturing of carbon fibers. Among the precursors used for the production of carbon fibers, polyacrylonitrile (PAN)-based and pitch-based precursors are the most important. A significant amount of work has been done on relating the fiber structure to the properties and translating that relationship into production for either reducing cost o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Macromolecular Symposia
سال: 2022
ISSN: ['1521-3900', '1022-1360']
DOI: https://doi.org/10.1002/masy.202100249