Production of Resistors by Arc Plasma Spraying
نویسندگان
چکیده
منابع مشابه
Plasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کاملNon-thermal Arc Plasma for Ethanol Reforming and Hydrogen Production
Non-thermal plasma, also called non equilibrium arc plasma, is a kind of low temperature plasma. Thermal arc plasma is usually driven by a high power supply and characterized by a high current (several amperes to tens of amperes) and a small low voltage (tens of voltage). It is a kind of strongly self-sustaining high-temperature discharge. Unlike thermal plasma, non-thermal arc plasma is usuall...
متن کاملPlasma Acid Production in a Gliding Arc Plasmatron
Plasma acid is an acidic solution simply produced from water and a carrier gas in an electrical discharge. These produced solutions are of high value for biological decontamination and industrial pollutant abatement applications. While several electrical discharges have been shown to produce plasma acid, the subject of this study is the gliding arc plasmatron, a rotating gliding arc discharge. ...
متن کاملArc Spraying 3Cr13 Molten Drop Impact Stress Numerical Analysis
In the thermal spraying process, the process for the molten metal particles to hit against matrix to form coating experiences great change temperature. Since the coating materials has different thermal physical properties with the matrix materials, the residual stress is surely left in the coating. Much bigger residual stress not only restricts coating thickness but also primarily affects coati...
متن کاملUltrafine particles emitted by flame and electric arc guns for thermal spraying of metals.
The ultrafine aerosol emitted by thermal spraying of metals using flame and electric arc processes has been characterized in terms of particle size distribution and emission rates based on both particle number and mass. Thermal spraying of Zn, Zn/Al, and Al was studied. Measurements taken using an electrical low pressure impactor and a condensation nucleus counter reveal an aerosol made up of v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ElectroComponent Science and Technology
سال: 1975
ISSN: 0305-3091
DOI: 10.1155/apec.2.135