Production of radioisotopes within a plasma focus device
نویسندگان
چکیده
منابع مشابه
Compare charged and uncharged particles leakage of plasma focus for medical radioisotopes production
In this study, to calculate the radioactivity of radioisotopes such as 11C, 15O, 18F and 123,124I in a focus plasma device for the production of medical radioisotopes, the particles of neutrons and protons with cubic targets of Nitrogen, Xenon, Carbon and a solid natural Boron is used. Particles energy are at the input of the program from 1MeV to 10MeV. Also, the total yield coefficient is cons...
متن کاملProduction of Fast Neutron with a Plasma Focus Device
Before its demise DIANA Hi-TECH, LLC, demonstrated the use of two 50 kJoule Plasma Focus devices for the copius production of fast neutrons, x-rays and radio-isotopes. Such a device is suitable for fast neutron non invasive interogation of contra-band materials including hidden nuclear materials. It could be particularly useful for a fast and fail safe interogation of large cargo containers, or...
متن کاملDamage studies on irradiated tungsten by helium and argon ions in a plasma focus device
Damage of tungsten due to helium and argon ions of a PF device was studied. Tungsten samples were irradiated by 20 shots of the plasma focus device with argon and helium as working gases, separately. The tungsten surface was analyzed by SEM, before and after irradiation. SEM revealed dense blisters with diameters of a few hundred nanometers, on the samples which were irradiated by helium ions, ...
متن کاملLow-Energy Plasma Focus Device as an Electron Beam Source
A low-energy plasma focus device was used as an electron beam source. A technique was developed to simultaneously measure the electron beam intensity and energy. The system was operated in Argon filling at an optimum pressure of 1.7 mbar. A Faraday cup was used together with an array of filtered PIN diodes. The beam-target X-rays were registered through X-ray spectrometry. Copper and lead line ...
متن کاملMagnetic CoPt Nanoparticles Deposition using Plasma Focus Device
A 3.3 kJ pulsed plasma focus device (NX2) was used to deposit magnetic CoPt nano-particles on Si (100) substrates at a low charging voltage of about 8kv. The hydrogen was used as filling gas at different gas pressures (2, 4, 6, and 8 mbar) to investigate the morphological, structural and magnetic properties of nanostructure thin films, using scanning electron microscopy (SEM), X-ray diffraction...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Technology and Radiation Protection
سال: 2005
ISSN: 1451-3994,1452-8185
DOI: 10.2298/ntrp0501033a