Production of hydrogen, active zerovalent iron and ferroferric oxide octahedron by alkaline etching Al–Fe alloys
نویسندگان
چکیده
Hydrogen is becoming important clean energy while zerovalent iron (ZVI) and ferroferric oxide are of great interest to many applications including environmental remediation chemical catalysis. Here, we report production hydrogen, octahedron by etching Al–Fe alloys using NaOH solutions. The rate hydrogen generation increased with increasing concentration the alloy's particle size decreasing Fe concentration. Alkaline alloy particles 425–850 μm produced 19–53 ZVI particles, which had paralleled ravines 0.2–0.3 wide on surface possessed specific areas 30–70 m 2 /g. microscale was highly active for removal a model pollutant acid orange 7 from water. After 3–6 h ageing in alkaline solution, were transformed octahedral saturation magnetization 68.2 emu/g residual 13.2 coercive force 330 Oe. This study provides new approach facile synthesis along on-board alloys. • Hydrolysis produces zero valent (aZVI) particles. aZVI have outperforms conventional nano-ZVI Ageing hydrolysis solution generates 3 O 4 crystals.
منابع مشابه
Hydrogen Production by Alkaline Water Electrolysis
Water electrolysis is one of the simplest methods used for hydrogen production. It has the advantage of being able to produce hydrogen using only renewable energy. To expand the use of water electrolysis, it is mandatory to reduce energy consumption, cost, and maintenance of current electrolyzers, and, on the other hand, to increase their efficiency, durability, and safety. In this study, moder...
متن کاملGreen rust and iron oxide formation influences metolachlor dechlorination during zerovalent iron treatment.
Electron transfer from zerovalent iron (Fe0) to targeted contaminants is affected by initial Fe0 composition, the oxides formed during corrosion, and surrounding electrolytes. We previously observed enhanced metolachlor destruction by Fe0 when iron or aluminum salts were present in the aqueous matrix and Eh/pH conditions favored formation of green rusts. To understand these enhanced destruction...
متن کاملAlkaline Etching of Silicon
Alkaline etching of crystalline using KOH (potassium hydroxide), TMAH (tetramethyl ammonium hydroxide), or EDP (ethylenediamene pyrocatecol) is performed for creating various feature definition in MEMS (micro electrical mechanical structures, solar cells, and integrated circuit manufacturing. KOH will be discussed in this section. The alkaline chemistries have the ability to preferentially etch...
متن کاملPrediction and hydrogen acceleration of ordering in iron-vanadium alloys.
Ab initio calculations of binary metallic systems often predict ordered compounds in contrast to empirical reports of solid solutions or disordered phases. These discrepancies are usually attributed to slow kinetics that retains metastable structures at low temperatures. The Fe-V system is an example of this phenomenon, in which we predict two ordered stable ground states, Fe3V and FeV3, wherea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Chemistry and Physics
سال: 2021
ISSN: ['0254-0584', '1879-3312']
DOI: https://doi.org/10.1016/j.matchemphys.2021.124789