Production of Castings by Patternless Process

Production of Iron Disulfide Nanoparticles by Hydrothermal Process

In this research, a single-stage low-temperature hydrothermal synthesis route was successfully developed for preparation of Iron Disulfide. The prepared powder was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). These analyses showed that nanoparticles were well crystallized, pyrite was the main product and the shape of crystals was nanorod. Also, the influences...

the effect of keeping reflective journals by language instructors on the process of reading comprehension among iranian high school students

خواندن ودرک مطلب از مهمترین مهارتها در یادگیری زبان خارجی محسوب می شود. این تحقیق تاثیر برگه های تامل برانگیز هدایت شده را در ارتقاع مهارت خواندن ودر ک مطلب در دانش اموزان دبیرستانی ایرانی بررسی می نماید. ازمجموع ?2 دانش آموز سال چهارم دبیرستان شهید رجایی شهرستان اسلامشهر¸ پس از اجرای آزمون استاندارد ((nelson 150a تعداد 39 دانش آموز که نمرات آنها یک سطح انحراف معیار بالاتر یا پایین تر ازمعدل قر...

Effect of Process Parameters on Mechanical Properties of the Investment Castings Produced by Using Expandable

The present study is concerned with the investigation of mechanical properties of A713 alloy castings produced by investment casting process using expandable polystyrene as the pattern material and the plaster of paris as the mould material. Experiments were conducted as per Taguchi’s L9 orthogonal array. Castings were made under the constraint of different process parameters like mould firing ...

Evaluation and Modification of the Block Mould Casting Process Enabling the Flexible Production of Small Batches of Complex Castings

Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters

This study aims at investigating changes in microstructure and strength of W alloy and Cu bimetals with varying spark plasma sintering (SPS) temperature and percentage of copper in W-Cu-Ni alloy. After SPS of W (12 wt%)-Cu (14 wt%)-Ni (3 wt%) alloy powder into consolidated discs at 1350 ° C, they were spark plasma sintered to copper discs at various temperatures. Assessment of the interface mic...