Production of AA2024-Matrix B4C-SiC- and B4C-Y2O3-Particle-Reinforced Composites by Powder Metallurgy and Investigation of Their Mechanical Properties
نویسندگان
چکیده
In this study, it was aimed to produce Al-matrix composite materials with B4C-SiC and B4C-Y2O3 particle reinforcement using the Powder Metallurgy (PM) method. composites in which were used at different sizes ratios, AA2024 powders selected as matrix material. The homogeneously mixed compacted room temperature under a pressure of 525 MPa. raw specimens sintered by keeping them temperatures for 45 minutes. subjected wear tests, their hardness density values investigated. effects added ratios on resistance, hardness, examined.
منابع مشابه
B4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملThe Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites
In this research, the SiC-matrix composite with different amounts of TiC (0, 2.5, 5, 7.5, and 10 wt%) supplemented with additives including 4.3 wt% Al2O3 and 5.7 wt% Y2O3 were utilized to initiate the required liquid phase. The sintering process was performed using pressureless sintering at 1900 °C for 1.5 hours under argon atmosphere. The compos...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولRecent Developments on UltRasonic cavitation BaseD soliDification pRocessing of BUlk magnesiUm nanocomposites
Magnesium based metal matrix composites (MMCs) have been extensively studied as an attractive choice for automotive and aerospace applications due to their low density and superior specific properties including strength, stiffness and creep resistance. Xi et al [1] studied the Ti6Al-4V particulate (TAp) reinforced magnesium matrix composite which is fabricated by powder metallurgy route. The te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Celal Bayar Universitesi Fen Bilimleri Dergisi
سال: 2022
ISSN: ['1305-130X', '1305-1385']
DOI: https://doi.org/10.18466/cbayarfbe.1130031