PRODUCTION OF A DUAL PHASE STEEL FROM A LOW CARBON MICROALLOYED STEEL
نویسندگان
چکیده
منابع مشابه
Low temperature superplasticity and thermal stability of a nanostructured low-carbon microalloyed steel
We describe here for the first time the low temperature superplasticity of nanostructured low carbon steel (microalloyed with V, N, Mn, Al, Si, and Ni). Low carbon nanograined/ultrafine-grained (NG/UFG) bulk steel was processed using a combination of cold-rolling and annealing of martensite. The complex microstructure of NG/UFG ferrite and 50-80 nm cementite exhibited high thermal stability at ...
متن کاملEffect of solidification rate on microstructure evolution in dual phase microalloyed steel
In steels the dependence of ambient temperature microstructure and mechanical properties on solidification rate is not well reported. In this work we investigate the microstructure and hardness evolution for a low C low Mn NbTi-microalloyed steel solidified in the cooling rate range of 1-50 Cs-1. The maximum strength was obtained at the intermediate solidification rate of 30 Cs-1. This result h...
متن کاملIsothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملLife cycle assessment of steel production from iron scrap: a case study at a steel plant
Background and Objective: The steel industry is the world's largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro softw...
متن کاملHeat treatment and mechanical properties of low-carbon steel with dual-phase microstructure
Purpose: The aim of the paper is to design heat treatment conditions of dual-phase steel and to determine their influence on the structure and mechanical properties of steel. Design/methodology/approach: The heat treatment of the C-Mn steel in order to obtain a dual-phase ferritic – martensitic structure of desirable phase fractions was realized. To investigate the influence of heat treatment p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DYNA
سال: 2020
ISSN: 1989-1490
DOI: 10.6036/9297