Production and Characterization of Activated Carbon From Iraqi Palm Fiber
نویسندگان
چکیده
منابع مشابه
Production of Activated Carbon from Cellulose Wastes
Cellulose wastes of a wood and paper factory were used to produce activated carbon. Several chemical agents under various conditions were used for production of activated carbon and hence their adsorption properties have been evaluated. In addition the effect of process parameters such as raw material, chemical agent concentration, impregnation ratio, carbonization temperature, carbonization ti...
متن کاملproduction of activated carbon from cellulose wastes
cellulose wastes of a wood and paper factory were used to produce activated carbon. several chemical agents under various conditions were used for production of activated carbon and hence their adsorption properties have been evaluated. in addition the effect of process parameters such as raw material, chemical agent concentration, impregnation ratio, carbonization temperature, carbonization ti...
متن کاملstudy and characterization of fiber optical gyroscope مطالعه و مشخصه یابی ژیروسکوپ فیبر نوری(تار نوری)
ژیروسکوپ فیبر نوری fog بر اساس پدیده تداخل ساگنام دو پرتو لیزری از یک فیبر نوری بسیار طولانی داده های لازم را فراهم می آورد
15 صفحه اولProduction of Activated Carbon from
Activated carbon is an adsorbent in the separation and purification industries. The adsorption capacity of activated carbon depends on porosity and its surface chemistry. In this review the production of activation carbon from a large number of abundant and low-cost materials and agricultural waste such as Camellia oleifera shell, bamboo, cherry stones, waste tea, and Paulownia flower are discu...
متن کاملFabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution
In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2015
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2015.17682