Producing metal parts with selective laser sintering/hot isostatic pressing
نویسندگان
چکیده
منابع مشابه
Direct Selective Laser Sintering and Containerless Hot Isostatic Pressing for High Performance Metal Components
A novel net shape manufacturing method known as SLSIHIP that combines the strengths of selective laser sintering (SLS) and hot isostatic pressing (HIP) is presented. Direct selective laser sintering is a rapid manufacturing technique that can produce high density metal components of complex geometry with an integral, gas impermeable skin. These components can then be directly post-processed to ...
متن کاملNeural Observer for the Hot Isostatic Pressing
Hot Isostatic Pressing (HIP'ing) is one of several processes used for consolidating porous materials (such as metal powders) to high density. The equations describing the HIP'ing system dynamics are immensely complicated and highly nonlinear, thus complicating any controller design for the system. Further complications arise due to the fact that one of the system's states, grain size, cannot be...
متن کاملExperimental based finite element simulation of cold isostatic pressing of metal powders
The present work addresses the various ingredients required for reliable finite element simulations of cold isostatic pressing (CIP) of metal powders. A plastic constitutive model for finite deformation is presented and implemented into an explicit finite element (FE) code. The FE implementation is verified so that numerical errors (both temporal and spatial errors) are kept under control. Ther...
متن کاملSensing a N D Modeling of the Hot Isostatic Pressing of Copper Pressing
-A detailed experimental evaluation of mathematical models for densification during hot isostatic pressing (HIP) has been conducted using high purity copper powder as a model system. Using a new eddy current sensor, the density of cylindrical compacts has been measured/n situ and compared with model predictions for the HIP process. Pressure shielding by the can has been found to influence the d...
متن کاملPhysical properties of a nickel-base alloy prepared by isostatic pressing and sintering of the powdered metal.
The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 1999
ISSN: 1047-4838,1543-1851
DOI: 10.1007/s11837-999-0067-x