Produced Water from Oil and Gas Exploration—Problems, Solutions and Opportunities

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Gas-oil Ratio and Water-oil Ratio

An indicator of bypassing is a premature drop in gas-oil ratio; i.e., earlier than expected collapse of gas saturation. Early gas collapse (water fillup) may indicate that channeling has occurred. In layered reservoirs with no or little vertical crossflow, water injection in an initially depressurized layer will cause GOR to drop rapidly. Often naturally fractured reservoirs exhibit fast gas co...

OIL AND GAS FIRST PAPER Oil and Gas Sectoral Analysis focusing on the Upstream Clustering Opportunities

Comprehensive list of business drivers(sufficient for success) from a high level scan of

Health Tourism: Opportunities, Constraints, Obstacles and Solutions

Investigating the Treatment of Oil and Gas Produced Water Using a Spray Dryer on a Bench Scale

The current work investigates the performance of a single-stage, bench-scale system using a spray dryer to treat produced water. The produced water is generated in three large reservoirs of Ahvaz, Maroon, and Mansouri fields, which have different compositions but the same high total dissolved solids (TDS) and total organic carbon (TOC). The results of this study indicate that the newly develope...