Processing of Transparent Super-Hydrophobic Polymer Film by Screen Printing Method
نویسندگان
چکیده
منابع مشابه
Thin Film Solar Cells by Screen Printing Technology
General properties of thin film solar cells and panels are discussed, and compared to crystalline silicon. A state-of-the-art of thin film cells and panels is given. One thin film production technique is elaborated: screen printing and sintering. The technique and its application to CdS/CdTe cells are presented. It is shown that sophistication to the basic technique can overcome inherent shortc...
متن کاملHighly efficient phosphorescent polymer OLEDs fabricated by screen printing
We demonstrate the use of screen printing in the fabrication of highly efficient phosphorescent polymer organic light-emitting devices (OLEDs) based on a green-emitting Ir(ppy)3 and a host polymer PVK. We incorporate PBD in the polymer host as an electron-transporting dopant and a-NPD as a hole-transporting dopant. The best screen-printed single-layer device exhibits very high peak luminous eff...
متن کاملSurface Nanostructures Formed by Phase Separation of Metal Salt–Polymer Nanocomposite Film for Anti-reflection and Super-hydrophobic Applications
This paper describes a simple and low-cost fabrication method for multi-functional nanostructures with outstanding anti-reflective and super-hydrophobic properties. Our method employed phase separation of a metal salt-polymer nanocomposite film that leads to nanoisland formation after etching away the polymer matrix, and the metal salt island can then be utilized as a hard mask for dry etching ...
متن کاملScreen Printing Process Design of Experiments for Fine Line Printing of Thick Film Ceramic Substrates
Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still co...
متن کامل3d Printing for Prototypes of Thin-film Pzt/polymer Microstructures
This work explores the viability of using 3D printing as a rapid-prototyping technique for microrobotic appendages made from thin-film PZT/polymer materials. First, the possibility of integrating piezoelectric materials into millimeter-scale (meso-scale) polymer melt-printed structures was investigated. Next, one specific robot limb geometry was chosen as a basis to compare structural modeling ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2003
ISSN: 0915-1869
DOI: 10.4139/sfj.54.677