Processing of Aluminum-Graphite Particulate Metal Matrix Composites by Advanced Shear Technology

Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review

Aluminum Metal Matrix Composites (MMCs) sought over other conventional materials in the field of aerospace, automotive and marine applications owing to their excellent improved properties. These materials are of much interest to the researchers from few decades. These composites initially replaced Cast Iron and Bronze alloys but owing to their poor wear and seizure resistance, they were subject...

Burnishing of Aluminum-Magnesium-Graphite Composites

Electrical Discharge Machining of Aluminum Metal Matrix Composites- A Review

Electrical discharge machining (EDM) is the process of machining electrically conductive materials by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. Aluminium metal matrix composites (AMMCs) refer to the class of light weight high performance aluminum ceramic material systems. The reinforcement in AMMCs could be in the f...

Fracture Analysis of Particulate Reinforced Metal Matrix Composites

A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...

Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites

In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...