Processing and characterization of screen printing Ba0.5Sr0.5Co0.8Fe0.2O3−δ inks
نویسندگان
چکیده
منابع مشابه
Screen Printing of Highly Loaded Silver Inks on Plastic Substrates Using Silicon Stencils.
Screen printing is a potential technique for mass-production of printed electronics; however, improvement in printing resolution is needed for high integration and performance. In this study, screen printing of highly loaded silver ink (77 wt %) on polyimide films is studied using fine-scale silicon stencils with openings ranging from 5 to 50 μm wide. This approach enables printing of high-reso...
متن کاملScreen-Printing Fabrication and Characterization of Stretchable Electronics
This article focuses on the fabrication and characterization of stretchable interconnects for wearable electronics applications. Interconnects were screen-printed with a stretchable silver-polymer composite ink on 50-μm thick thermoplastic polyurethane. The initial sheet resistances of the manufactured interconnects were an average of 36.2 mΩ/◽, and half the manufactured samples withstood singl...
متن کاملInk-Jet Printing Cotton with Cationic Reactive Dye Based Inks
The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...
متن کاملPolymerization of Vegetable Oils and Their Uses in Printing Inks
Materials. Alkali-refined soybean oil was obtained from Riceland Foods (Stuttgart, AR) and Archer Daniels Midland (Decatur, IL). Alkali-refined canola and cottonseed oils were purchased from Bunge Oil (Bradley. IL). Alkalirefined sunflower oil was obtained from Archer Daniels Midland. Alkali-refined safflower oil was obtained from Pacific Anchor Chemical Co. (Cumberland, RI). Polystyrene standa...
متن کاملPlanar and Three-Dimensional Printing of Conductive Inks
Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes. Direct-write assembly is a 1-to-3D printing technique tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2016
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-016-1175-1