PROCESSABILITY OF WC-CO POWDER MIXTURES USING SLM ADDITIVE TECHNOLOGY

Additive Manufacturing of Casting Tools Using Powder- Binder-Jetting Technology

This chapter presents the use of the additive manufacturing (AM) method powderbinder-jetting (PBJ) for the generation of molds and cores for casting applications. Theoretical information on process steps and the binding of particles is given. For the based chemistry, examples are presented and the transfer from conventional produc‐ tion processes to powder-binder-jetting is explained. For sand ...

بررسی رفتار سایشی کامپوزیت‌های WC-10wt%Co تجاری، WC-40vol%Co و WC-40vol%FeAl-B در دمای محیط

در این پژوهش رفتار سایشی کامپوزیت‌های تجاری WC-10wt%Co (H10F)، WC-40vol%Co و کامپوزیت‌های WC-40vol%FeAl-B با مقادیر مختلف بور از صفر تا ppm1000 به روش پین روی دیسک بررسی شد. آزمون‌های سایش در دمای محیط، تحت بار 40 نیوتن و طی مسافت 100 متر انجام شدند. سطوح سایش به وسیله میکروسکوپ الکترونی روبشی (SEM) مورد بررسی قرار گرفت. نتایج نشان داد که در بین نمونه‌ها، کامپوزیت WC-40vol%FeAl بدون بور کمترین ...

Aqueous Processing of WC-Co Powders

Performance Improvement of Porous Asphalt Mixtures using Crumb Rubber and Steel Slag Powder

In recent decades, porous asphalt has been extended for surface drainage in various regions throughout the world. The permeability of porous asphalt has an important role in the performance of asphalt pavements in the rainy weather. The most remarkable problem related to the porous asphalt is its short service time. Considerable efforts have been made to enhance the mechanical properties of por...

Residual Stress in Ground WC-Co Coatings

High velocity oxygen fuel (HVOF) spray technique is one of the leading technologies that have been proposed as an alternative to the replacement of electrolytic hard chromium plating in a number of engineering applications. In this study, WC-Co powder was coated on AISI1045 steel using high velocity oxy fuel (HVOF) method. The sinψ method was used to evaluate the through thickness residual stre...