Process Parameters Optimization in Membrane Fabrication for Produced Water Treatment Using Response Surface Methodology (RSM) and Central Composite Design (CCD)
نویسندگان
چکیده
منابع مشابه
impact resistance and optimization of metal-composite-metal auto body panel using response surface methodology (rsm)
the impact resistance of new lightweight panel is studied. this panel consists of two thin metal layers bonded together by intermediate fiber/epoxy layers (mcm-sheets). to simulate a behavior of this kind of impact problem, explicit and implicit finite element software abaqus is used. in order to validate the finite element modeling, these results have been compared with experimental test resul...
متن کاملHydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology
In this study, the response surface methodology (RSM) based on the central composite design (CCD) was used to optimize the preparation condition of polypropylene-grafted maleic anhydride (PP-g-MA) microporous membrane by thermally-induced phase separation (TIPS) method. A mixture of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) was used as diluent. The effect of polymer composition and qu...
متن کاملOptimization of US-Electropersulfate Process for Leachate Treatment by Response Surface Methodology
Introduction: Chemical Oxidation Demand (COD) is an important parameter in treatment of leachate. Leachate from solid waste has a high pollutants that must be treatment before discharge to environment. The aim of this study was optimization of US-Electro/persulfate process, predicate of optimum conditions by RSM for landfill leachate treatment. Methods and materials: In this experimental st...
متن کاملApplication of Response Surface Methodology (rsm) – Ccd for the Production of Laccases Using Submerged Fermentation
Laccases are multi-copper oxidases widely distributed in plants, animals, insects and microorganism. These enzymes catalyze the one-electron oxidation of a wide range of organic and inorganic substances, including mono, di and poly phenols, aminophenols, methoxy phenols, aromatic amines and ascobate with the concomitant four electron reduction of oxygen to water. Laccase has the focus of much a...
متن کاملOptimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology
Research has shown that many Bentonite in Nigeria are unsuitable for oil well drilling in their natural states. Their modification and blends with some additives could increase the yield and boost their suitability. Many indigenous polymers have become very popular due to environmental friendliness and their ability to modify rheology of clay suspension. However, the common natural polymers are...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Reaktor
سال: 2018
ISSN: 2407-5973,0852-0798
DOI: 10.14710/reaktor.18.1.7-15