Process Optimization for Co-based Self-flux Alloy Coating by Taguchi Method
نویسندگان
چکیده
منابع مشابه
Optimization of WEDM Process Parameters on Titanium Alloy Using Taguchi Method
This paper describes an optimum cutting parameters for Titanium Grade5 (Ti-6Al-4V) using Wire-cut Electrical Machining Process (WEDM). The response of Volume Material Removal Rate (MRR) and Surface Roughness (Ra) are considered for improving the machining efficiency. A brass wire of 0.25mm diameter was applied as tool electrode to cut the specimen. The Experimentation has been done by using Tag...
متن کاملOptimization mechanical properties of polyurethane/Sio2 nanocomposite on Polypropylene substrate for automotive clear coating by Taguchi method
The effect of different parameters including: nano silica content, curing temperature, type of hardener, and flash-off time on mechanical and optical properties of polyurethane PU based clearcoat was investigated via standard Taguchi L9 method. Dispersion of nano silica in the resultant nanocomposites was explored by scanning electron microscopy SEM. SEM images showed a fine dispersion through ...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملOptimization of Surface Roughness Using Taguchi Method for Dry Machining In Milling Process of Alloy Special Steel
In machining to improve machinability, productivity and to extend tool life coolants and lubricants where used .Increasing industry the use of cutting fluids subsequently increasing this leads in reduce of living conditions nearby future all the governments recommend the manufacturers to reduce the usage of toxicity cutting fluids. Still research for dry machining challenge is exiting for the i...
متن کاملDEA-based Taguchi method for Optimization of CNC End milling Process parameters
In any machining operations, quality and productivity are the two important conflicting objectives. In order to give assurance for high productivity, some extent of quality has to be compromised. Similarly productivity will be decreased while the efforts are channelized to enhance quality. Therefore it is essential to optimize both quality and productivity simultaneously. Surface roughness and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Society For Power System Engineering
سال: 2013
ISSN: 1226-7813
DOI: 10.9726/kspse.2013.17.6.108