Process Controls for Surface Integrity Generated by Hard Turning

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning

Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...

متن کامل

Dry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning

Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...

متن کامل

Cutting Disturbances in Hard Turning Process

Assumption of cutting disturbances in hard turning process (caused by variations in depth of cutting, high passive force Fp or small tool nose radius) could be confirmed with several indicators. These indicators can be monitored during turning process(forces, vibrations, sound, etc.) or after process has been finished (roughness, temperature, wear, etc). Variation of depth of cutting as well as...

متن کامل

dry friction and wear performance of micro surface textures generated by ultrasonic assisted face turning

nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. in this paper, ultrasonic assisted turning (uat) isperformed to create the micro textures on the flat faces. micro surface texturing ismade on the al7075-t6 by the uat in the face turning process. then, the influences of cutting speed feed, vibration direction and vibration ampl...

متن کامل

Empirical modeling of Hard Turning process of Inconel using Response Surface Methodology

In turning process, engineers are often faced with the problems of relating the cutting parameters (Speed, feed, depth of cut) to the output responses(Feed force, Thrust force, Cutting force, Surface roughness) to optimize the process. Also, Turing is done with the aim of achieving the best surface finish. But without optimization, it is not possible to automate the process. Turning process inv...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia CIRP

سال: 2016

ISSN: 2212-8271

DOI: 10.1016/j.procir.2016.02.357