Process and Mechanism of Sealing 65 vol.% SiCp/ZL102 Composite and DM305 Electronic Glass with Borosilicate Glass

نویسندگان

چکیده

SiC-particulate-reinforced aluminum matrix composites (SiCp/Al MMCs) are widely used in the aerospace field due to their high specific stiffness and strength, low thermal expansion coefficient, good radiation resistance. In process of application promotion, there is a connection problem between electronic glass. this work, lead-free SiO2-B2O3-Na2O glass filler was seal 65 vol.% SiCp/ZL102 DM305 an atmospheric environment. The effects sealing temperature on properties joints were studied by scanning electron microscopy (SEM) energy dispersive X-ray spectroscopy (EDS). Additionally, causes defects fracture mechanisms analyzed. results showed that base material connected through dual mechanism Al, Na, Si, O element diffusion reaction mechanical occlusion. At 540 °C holding time 30 min, joint interface dense crack-free. Meanwhile, average shear strength reached 13.0 MPa, leakage rate air tightness 1 × 10−9 Pa·m3/s. brittle features revealed step-like morphology fracture, which originated from brazing seam propagated into pore. crack gradually both sides as area expanded, ultimately resulting fracture.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PREPARATION OF Fe/GLASS COMPOSITE BY REDUCTION OF Na2O– Fe2O3–B2O3–SiO2–ZnO GLASS AND GLASS CERAMICS

In the present study, the feasibility of α-Fe ferromagnetic phase formation in glass and glass-ceramic by reduction in hydrogen atmosphere have been investigated. The glass with the composition of 35Na 2 O–24Fe2O3–20B 2O3 – 20SiO 2 –1ZnO (mol %) was melted and quenched by using a twin roller technique. As quenched glass flakes were heat treated in the range of 400-675 °C for 1-2 h in h...

متن کامل

Sintering behaviour of composite materials borosilicate glass-ZrO2 fibre composite materials

The characteristics and properties of mixtures of a borosilicate glass and ZrO2 fibres obtained from compacts isothermally sintered are presented. Three different particle sizes of glass powder and different sintering temperatures and times have been used to reveal the influence of the specific surface area and the glass matrix viscosity on sintering. The fundamental developed aspects are the s...

متن کامل

Structure of Rhenium-Containing Sodium Borosilicate Glass

A series of sodium borosilicate glasses were synthesized with KReO4 or Re2O7, to 10,000 ppm (1 mass%) target Re, to assess effects of large concentrations of rhenium on glass structure and fto estimate solubility of Tc, a radioactive component in low active waste nuclear glasses. Rhenium was used as a surrogate for Tc for laboratory testing, due to similarities in chemistry, ionic size, and red...

متن کامل

In Vitro Degradation of Borosilicate Bioactive Glass and Poly(l-lactide-co-ε-caprolactone) Composite Scaffolds

Composite scaffolds were obtained by mixing various amounts (10, 30 and 50 weight % [wt %]) of borosilicate bioactive glass and poly(l-lactide-co-ε-caprolactone) (PLCL) copolymer. The composites were foamed using supercritical CO₂. An increase in the glass content led to a decrease in the pore size and density. In vitro dissolution/reaction test was performed in simulated body fluid. As a funct...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metals

سال: 2023

ISSN: ['2075-4701']

DOI: https://doi.org/10.3390/met13040817