Process analysis of intensified absorber for post-combustion CO2 capture through modelling and simulation

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of Co2 Capture Process

Carbon dioxide capture process has been simulated and studied under different process conditions. It has been shown that several process parameters such as lean amine temperature, number of adsorber stages, number of stripper stages and stripper pressure affect different process conditions and outputs such as carbon dioxide removal and reboiler duty. It may be concluded that the simulation of c...

متن کامل

Study of mass transfer correlations for intensified absorbers in post- combustion CO2 capture based on chemical absorption

Process intensification (PI) technologies such as rotating packed beds (RPBs) could reduce the size of absorber used in post-combustion CO2 capture (PCC) based on chemical absorption processes by about 12 times compared to absorber with standard packed beds. However, mass transfer correlations for predicting effective interfacial area and liquid film mass transfer coefficient in RPBs are limite...

متن کامل

Control of a post-combustion CO2 capture plant during process start-up and load variations

Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...

متن کامل

Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture

Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...

متن کامل

Systems Analysis of Ionic Liquids for Post-combustion CO2 Capture at Coal-fired Power Plants

The main objective of this study is to investigate the feasibility and costs of ionic liquid (IL)-based CO2 capture systems at pulverized coal-fired (PC) power plants. The IL selected for this assessment is trihexyl(tetradecyl)phosphonium 2-cyanopyrrolide ([P66614][2-CNpyr]), achieving a 1:1 and reversible chemical reaction between [2-CNpyr] and CO2. A multi-stage equilibrium-based modeling fra...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Greenhouse Gas Control

سال: 2014

ISSN: 1750-5836

DOI: 10.1016/j.ijggc.2013.12.005