Problems of shale oil hydrocarbons, ultra-viscous oil reservoirs and natural bitumen deposits development in Tatarstan

Coal, Oil Shale, Natural Bitumen, Heavy Oil, and Peat

A brief overview of the geology of heavy oil, bitumen and oil sand deposits

Introduction There are three major oil sand areas in Canada, all in Alberta. There is also an oil sand deposit on Melville Island in the Arctic. The three major oil sand areas are from highest to lowest volume of reserves-in-place (AEUB 2003) Athabasca, Cold Lake and Peace River oil sand areas notwithstanding that bitumen reserves are also evident in subcropping carbonate rocks in Athabasca and...

The Presence of Polycyclic Aromatic Hydrocarbons (pah) in Oil Obtained at Pyrolysis of Jordan Oil Shale

The presence of polycyclic aromatic hydrocarbons (PAH) in the oil obtained at pyrolysis of Jordan oil shale in a fluidised-bed reactor in the atmosphere of nitrogen and nitrogen/steam has been investigated. The final pyrolysis temperature was 520 °C, at which the maximum oil yield was established. The derived oils were fractionated into chemical classes using mini-column liquid chromatography f...

Heavy Oil and Tar Sand Bitumen

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...