Problems of Mixed Mode Crack Propagation
نویسندگان
چکیده
منابع مشابه
Mixed Mode Crack Propagation of Zirconia/Nickel Functionally Graded Materials
Zirconia-nickel functionally graded materials were obtained by powder metallurgy technique. The microstructure, residual stress, fracture toughness and Vickers hardness were investigated. Mixed-mode fracture response of YSZ /Ni functionally graded materials was examined utilizing the three point bending test and finite element method (Cosmos/M 2.7). The results show that the stress intensity fac...
متن کاملPlastic Analysis of Mixed Mode Plane Stress Crack Problems
Two parameters are identified for characterizing the deformation in the plastic zone near the tip of a crack when mixed mode conditions prevail. Details of the near-tip stress and strain distributions are presented f or hardening materials in which a diffus e plastic zone occurs under plane stress conditions. For small scale yielding the two near-tip parameters are related to the two elastic s ...
متن کاملEstimation of the crack propagation direction in a mixed-mode geometry via multi-parameter fracture criteria
The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched beam specimen; various levels of mode-mixity are ensured by modifications in the crack length and crack eccentricity. The direction of crack propagation is e...
متن کاملMesh refitting approach: a simple method to model mixed-mode crack propagation in nonlinear elastic solids
We devise a finite element methodology to trace quasi-static through-thickness crack paths in nonlinear elastic solids. The main feature of the proposed method is that it can be directly implemented into existing large scale finite element solvers with minimal effort. The mesh topology modifications that are essential in propagating a crack through the finite element mesh are accomplished by ut...
متن کاملFinite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Mechanics
سال: 1985
ISSN: 0021-8936,1528-9036
DOI: 10.1115/1.3169018