Problems in Thermodynamic Analyses in a Fe-Cr-Ni-Mo System Alloy

Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy

The stability of the eutectic carbide in a self-designed Fe-Cr-Mo-W-V-C alloy during solidifi atio as a alyzed i this ork. The ar ide pre ipitatio rule of the steel was calculated by Thermo-Calc.The typical microstructures at 1240 °C and 1200 °C ere o ser ed y opti al i ros ope OM ,field e issio s a i g ele tro microscope (FESEM) and transmission electron microscope (TEM). The selected area dif...

Nanostructurization of Fe-Ni Alloy

Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...

Influence of temperature on passive film properties on Ni–Cr–Mo Alloy

Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni - 22 Cr - 2 Fe Alloy

Ni-Cr-Fe alloy specimens were fatigued in a hydrochloric acid solution cell at pH 5.6 ±0.1. Results show that the number of surface slip bands forming, extending, and widening increased with the number of cycles. Results also indicated that, initially, cracks initiated as transgranular features but took on intergranular forms as the number of cycles increased.

Calculated oscillation periods of the interlayer coupling in Fe/Cr/Fe and Fe/Mo/Fe sandwiches.