Printed dual-band end-feed dipole radiators
نویسندگان
چکیده
منابع مشابه
Dual-band and Wideband Design of a Printed Dipole Antenna Integrated with Dual-band Balun
A dual-band printed dipole antenna with integrated balun feed is given in this paper. First, the fork-shaped slot is etched on the arms of the printed dipole antenna to achieve the dual-band operation with resonances at WLAN bands. The radiating element without balun is optimized and operates at 2.4 GHz (2180–2750MHz) and 5.2GHz (5040 MHz–5480MHz) where return loss is less than −10 dB. In order...
متن کاملTriple - Band Printed Dipole Tag Antenna For
Abstract—In this paper, a triple-band printed dipole tag antenna is proposed for Radio Frequency Identification (RFID). The tripleband printed dipole antenna is designed to operate at 0.92GHz, 2.45GHz and 5.8 GHz using Computer Simulation Technology (CST) software. In order to achieve triple-band operation, the proposed antenna contains two branch elements, which act as an additional resonator....
متن کاملDual-Band Loop-Loaded Printed Dipole Antenna with a Wideband Microstrip Balun Structure
─ A novel loop-loaded printed dipole (LLPD) with a wideband balun structure is presented for aiming a dual-band antenna operation at 3.0/5.5 GHz bands. The proposed balun structure alone demonstrates VSWR<1.5 performance over a 3:1 bandwidth. As the loop elements placed on the antenna aperture provides dual-band operation with at least 15% impedance bandwidths, the wideband balun/feed allows fo...
متن کاملDual-band Printed Dipole Antenna Array for an Emergency Rescue System Based on Cellular-phone Localization
This paper describes our contribution in the RNRT project called LUTECE, dedicated to the emergency localisation of cellular phones. This contribution takes place in the field of antennas, with the development of two biband systems : a directive array for the emission part, and a circular array of five elements with separated outputs for the receiving part. Different evolutions of these antenna...
متن کاملTriple-band Printed Dipole Tag Antenna for RFID Application
In this paper, a triple-band printed dipole tag antenna is proposed for RFID application. The tri-band printed dipole antenna is designed at 0.92 GHz, 2.45 GHz and 5.8 GHz using Computer Simulation Technology (CST). In order to achieve triple-band operation, the proposed antenna contains two branch elements, which acts as an additional resonator. The designed antenna was fabricated using Taconi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of «Almaz – Antey» Air and Space Defence Corporation
سال: 2019
ISSN: 2542-0542
DOI: 10.38013/2542-0542-2019-4-35-42