Principle Analysis of Soil Electrical Conductivity Test Based on Pulsed Eddy Current
نویسندگان
چکیده
منابع مشابه
Wavelet based signal analysis of pulsed eddy current signals
This paper deals with response signals processing in eddy current non-destructive testing. Non-sinusoidal excitation is utilized to drive eddy currents in a conductive specimen. The response signals due to a notch with variable depth are calculated by numerical means. The signals are processed in order to evaluate the depth of the notch. Wavelet transformation is used for this purpose. Obtained...
متن کاملPulsed eddy current empirical modeling
The pulsed eddy current responses to varying material thickness and conductivity are modeled using an electrical circuit ideal transformer non-linear model. The Levenberg-Marquardt algorithm is used to curve fit the experimental signal to the model. The resulting synthetic signal is examined for its ability to preserve experimental signal features such as lift-off point of intersection (LOI), a...
متن کاملMeasurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques
This paper studies the electrical properties of open-celled aluminium foams manufactured by a novel sintering-dissolution process (SDP) using non-destructive eddy current testing. Experimental measurement results are first presented by means of an impedance analyser under swept frequency testing for the determination of electrical conductivity of Al foams. A double air-cored solenoidal sensor h...
متن کاملStress Measurement Using Pulsed Eddy Current Thermography
This paper reports a noncontact inspection method, using Pulsed Eddy Current (PEC) stimulated thermography, for the evaluation of the anisotropic dependency of electrical conductivity of steel exposed to tensile stress. This method combines microscope lens based thermography with PEC using a rectangular excitation coil, giving directional excitation, to infer the electromagnetic properties vari...
متن کاملEddy current measurements of electrical conductivity and magnetic permeability of porous metals
This paper presents a method, which simultaneously estimates the electrical conductivity and magnetic permeability of porous metals. Porous Cu and Fe manufactured by the lost carbonate sintering process have been tested. An air-cored solenoid coil was designed for the measurements of rod-shaped samples when inserted coaxially with the coil. It was theoretically found that the phase-frequency re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2019
ISSN: 1755-1315
DOI: 10.1088/1755-1315/242/4/042018