Pressureless Sintering of Injection Molded Zirconia Toughened Alumina Nanocomposites

Selective etching of injection molded zirconia-toughened alumina: Towards osseointegrated and antibacterial ceramic implants.

Due to their outstanding mechanical properties and excellent biocompatibility, zirconia-toughened alumina (ZTA) ceramics have become the gold standard in orthopedics for the fabrication of ceramic bearing components over the last decade. However, ZTA is bioinert, which hampers its implantation in direct contact with bone. Furthermore, periprosthetic joint infections are now the leading cause of...

Pressureless Sintering t-zirconia@d-Al2O3 (54 mol%) Core–Shell Nanopowders at 11201C Provides Dense t-Zirconia-Toughened a-Al2O3 Nanocomposites

Zirconia-toughened alumina (ZTA) is of growing importance in a wide variety of fields exemplified by ZTA prosthetic implants. Unfortunately, ZTA composites are generally difficult to process because of the need to preserve the tetragonal zirconia phase in the final dense ceramic, coincident with the need to fully densify the a-Al2O3 component. We report here that liquid-feed flame spray pyrolys...

Fracture simulation for zirconia toughened alumina microstructure

Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses.

Mono-phase bio-ceramics (alumina and zirconia) are widely used as femoral heads in total hip replacements (THR) as an alternative to metal devices. Unfortunately, the orthopaedic community reports significant in-vivo failures. Material scientists are already familiar with composites like alumina zirconia. Since both are biocompatible, this could prove to be a new approach to implants. This pape...

Processing and Properties of Zirconia-Toughened Alumina Prepared by Gelcasting

Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...