Pressureless Sintering and High-Temperature Strength of SiC-AlN Ceramics
نویسندگان
چکیده
منابع مشابه
Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites
The effect of SiC content, additives, and process parameters on densification and microstructural properties of pressureless sintered ZrB2– (1–10 wt %) SiC particulate composites have been studied. The ZrB2–SiC composite powders mixed by Spex mixer with 1-2wt% C (added as graphite powder) and CMC have been cold-compacted and sintered in argon environment in the temperature range of 1800–2100ºC ...
متن کاملPressureless Sintering of Si3N4 Ceramic Using AlN and Rare-Earth Oxides
Using intermediate, liquid-forming compositions in the approach focuses on the Si3N4–R2O3 binary, where R2O3 is any (Y,La)2O3–AlN system as additives, fully dense Si3N4 ceramrare-earth oxide (or Y2O3) used singly or severally. After sinics with high strength at high temperature have been tering, this composition forms -Si3N4 and some refractory rareobtained by pressureless sintering. The cerami...
متن کاملMicrowave Sintering of High Thermal Conductivity Aln
In this study, a combustion synthesized AlN powder was sintered using microwave as heating source. The microwave was 2.45 GHz and the sintering process was carried out in a single-mode cavity. The sintering temperature was between 1800°C and 2000°C with a power ranging from 400 to 700W. The as-synthesized AlN was ground to under 2μm and yttria was used as sintering aid. The effects of the amoun...
متن کاملNitride Based Ceramic Nanocomposites with Multifunctionality
Two types of Aluminum nitride (AlN) based ceramic nanocomposite with multifunctionality were investigated to improve machinability or electrical conductivity of AlN ceramics with high thermal conductivity. The AlN/BN nanocomposite was fabricated by pressureless sintering AlN-BN composite powder, which was prepared by reducing and heating AlN particles coated with a mixture of boric acid, urea a...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1994
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.102.727