Pressure Measurements in Jet Diffusion Using a Developed Hot-Wire Static Pressure Sensor
نویسندگان
چکیده
منابع مشابه
Mean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet
An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104 to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...
متن کاملStatic Pressure Distribution in an Excited Jet: Some Observations (RESEARCH NOTE)
A plane subsonic jet was subjected to periodic oscillations in the near nozzle region by a twin vane system. During excitation, the jet was found to spread significantly and entrain mass much more than its steady counterpart. Time averaged static pressure measured in the flow field with a disc probe exhibited prominent well defined suction regions different from that of a steady jet.
متن کاملCorrection of Static Pressure on a Research Aircraft in Accelerated Flight Using Differential Pressure Measurements
A method is described that estimates the error in the static pressure measurement on an aircraft from differential pressure measurements on the hemispherical surface of a Rosemount model 858AJ air velocity probe mounted on a boom ahead of the aircraft. The theoretical predictions for how the pressure should vary over the surface of the hemisphere, involving an unknown sensitivity parameter, lea...
متن کاملRelation Between Wire Resistance and Fluid Pressure in the Transient Hot-Wire Method
The resistance of metals is a function of applied pressure, and this dependence is large enough to be significant in the calibration of transient hot-wire thermal conductivity instruments. We recommend that for the highest possible accuracy, the instrument's hot wires should be calibrated in situ. If this is not possible, we recommend that a value of γ, the relative resistance change with press...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2011
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.77.2442