Pressure Drop due to Friction in Small Rectangular Channel
نویسندگان
چکیده
منابع مشابه
Pressure Drop Measurements in Rectangular Micro - Channel Using Gas Flow
Due to the need for practical cooling technologies which could dissipate high heat fluxes, an experimental study of pressure drop in micro-channel was performed. In this work, laminar flow friction factors were determined using gas (air) as flow medium. Pressure drop vs flow rate data were used to evaluate friction factors in two parallel microchannels, namely MCP1 and MCP2 (1.0 mm deep x 0.240...
متن کاملExperimental and Computational Investigation of Flow Development and Pressure Drop in a Rectangular Micro-channel
Flow development and pressure drop were investigated both experimentally and computationally for adiabatic single-phase water flow in a single 222 m wide, 694 m deep, and 12 cm long rectangular micro-channel at Reynolds numbers ranging from 196 to 2215. The velocity field was measured using a micro-particle image velocimetry system. A three-dimensional computational model was constructed which ...
متن کاملThe pressure drop along rectangular microchannels containing bubbles.
This paper derives the difference in pressure between the beginning and the end of a rectangular microchannel through which a flowing liquid (water, with or without surfactant, and mixtures of water and glycerol) carries bubbles that contact all four walls of the channel. It uses an indirect method to derive the pressure in the channel. The pressure drop depends predominantly on the number of b...
متن کاملNumerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel
The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...
متن کاملReducing Pressure Drop in Microscale Channel Using Constructal Theory
The effectiveness of microchannels in enhancing heat transfer has been demonstrated in the semiconductor industry. In order to tap the microscale heat transfer effects into macro geometries, overcoming the cost and technological constraints, microscale passages were created in macro geometries machined using conventional fabrication methods. A cylindrical insert was placed within a pipe, and ge...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Marine Environment and Safety
سال: 2012
ISSN: 1229-3431
DOI: 10.7837/kosomes.2012.18.5.461