Pressure Distribution around the Melt Delivery Tube for a Confined-type Gas Atomization Nozzle

Flow mechanisms in high pressure gas atomization

Very fine (d < 10/~m) metal and alloy powders can be produced efficiently by a high pressure gas atomization (HPGA) technique. Rapid solidification processing, metal injection molding, thermal spraying and other emerging powder-processing approaches benefit from the use of such fine powders. This paper reports on the results of an investigation of gas atomization process dynamics with emphasis ...

Modeling of liquid metal flow and heat transfer in delivery tube during gas atomization

A numerical model is developed to describe the flow and heat transfer behavior of liquid metals in a cold delivery tube during gas atomization. Numerical calculations for liquid In, Sn, Bi, Pb, Zn and Sb are performed to investigate the influence of processing parameters and material properties on the flow and cooling of the liquid metals, and to predict the minimum melt superheat that is neces...

Investigation of Sour Natural Gas Decomposition in a Nozzle-type Solar Reactor for Hydrogen Production

Atomization Uniformity in Gas -

There are two important aspects to good injector performance in rocket engines—the atomization performance (droplet size and distribution, for example) and uniformity of operation (even distribution of droplets in time and space). In general, both of these aspects are affected by the geometry and operating conditions of the injector. In studying atomization performance, prior work has largely f...

Flow Visualization Around a Non - Circular Tube

The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...