Present Status of BSCCO Inner Coil for a 1 GHz NMR Magnet
نویسندگان
چکیده
منابع مشابه
Electromagnetic-Induced Quench of an Inner-Shim Coil for a REBCO High-Temperature Superconducting NMR Magnet
A RE(rare earth)Ba2Cu3Ox (REBCO) high-temperature superconducting (HTS) coil is a promising candidate to achieve a nuclear magnetic resonance (NMR) magnet operated at a magnetic field >23.5 Tesla (T), i.e. 1 H NMR frequency of 1 GHz. We developed and tested a 400 MHz (9.39 T) NMR magnet using an REBCO inner coil. The system included a low-temperature superconducting (LTS) shim coil inside the R...
متن کاملCommon Coil Magnet System for Vlhc
This paper introduces the common coil magnet system for the proposed very large hadron collider (VLHC) [1]. In this system, the high energy booster (HEB), the injector to VLHC, is integrated as the iron dominated low field aperture within the coldmass of the common coil magnet design introduced earlier [2]. This 4-in-1 magnet concept for a 2-in-1 machine should provide a major cost reduction in...
متن کاملAn 800 MHz all-REBCO Insert for the 1.3-GHz LTS/HTS NMR Magnet Program – A Progress Report
A critical component of the 1.3-GHz NMR Magnet (1.3G) program, currently ongoing at the Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center, MIT and now approaching its final stage, is the all high-temperature superconductor (HTS) 800-MHz insert (H800). The insert consists of three nested DP coils fabricated with 6-mm wide REBCO conductor. Coil 1, the innermost coil of H800 has a...
متن کاملPermanent Magnet Arrangements for Low-Field NMR
For low-field NMR, NdFeB permanent magnet arrangements are proposed to provide the static polarizing magnetic field. Especially a parallel and a circular arrangement of the permanent magnets, iron yokes and small shim magnets were tested and improved by COMSOL. The intent was to guide the design and the construction of NMR magnets by calculating the magnetic field strength and the associated fi...
متن کاملCalibration of Rotating Coil Arrays for Particle Accelerator Magnet Testing
Synchrotron particle accelerators are mainly composed of magnets. Long dipole magnets are employed to bend and to contain the beam within a circular trajectory. Their field quality is usually tested by arrays of rotating coils. Typically the measurements must be affected by low uncertainty (+10) and the calibration of the sensing coils, in terms of surface and angle, is critical. In this paper,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2002
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.66.4_201