Presence of bacteria and bacteriophages in full-scale trickling filters and an aerated constructed wetland

Seasonal Variation of Nutrient Removal in a Full-Scale Artificial Aerated Hybrid Constructed Wetland

To improve nutrient removal, a full-scale hybrid constructed wetland (CW) consisting of pre-treatment units, vertical-baffled flow wetlands (VBFWs), and horizontal subsurface flow wetlands (HSFWs) was installed in August 2014 to treat sewage wastewater. Artificial aeration (AA) was applied continuously in the VBFW stage to improve the aerobic condition in the hybrid CW. Water samples were colle...

Groundwater Quality Impacts from a Full-Scale Integrated Constructed Wetland

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...

Efficiency and kinetic modeling of removal of nutrients and organic matter from a full-scale constructed wetland in Qasr-e-Shirin, Iran

Background: This study assessed the removal of organic material and nutrients from full-scale subsurface flow (SSF) constructed wetlands (CWs) followed by anaerobic stabilization ponds under environmental conditions. Methods: The effluents were distributed evenly in 12 reed beds. Samples were taken twice monthly for a total of 6 months from several points in the wetland. Biochemical oxygen dema...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...