Preparation of ZrB2 Powders by a Combined Sol-Gel and Carbothermal Reduction Method
نویسندگان
چکیده
منابع مشابه
Synthesis of HfB2 Powders by Carbothermal Reduction
In this research, solid state carbothermal synthesis of HfB2 Nano powders was investigated. For this purpose, HfO2,H3BO3, carbon active or phenolic resin were used as raw materials for carbothermal reaction. After 2-4 hours of milling the raw materials by a planetary ball in an ethanol media, the mixture was heat dried and pressed in to disks under pressure of 20-30 bar. The disks were then pla...
متن کاملMorphology investigation of alumina nano-powders prepared by a sol-gel combustion method
Highly sinterable alumina nano-powders have been synthesized by a sol-gel combustion method with glycine asfuel. The preparation involved the thermal decomposition of a chelating agent (fuel)-nitrate gel and theformation of amorphous precursors. The nanopowders calcined at 1100°C were characterized by X-ray powderdiffraction (XRD) and Scanning Electron Microscopy (SEM). It was found that the ch...
متن کاملPreparation of (Pb,Ba)TiO3 powders and highly oriented thin films by a sol-gel process
Solid solution Pb1-xBaxTiO3, with particular emphasis on Pb0.5Ba0.5TiO3, was prepared using a sol-gel process incorporating lead acetate trihydrate, barium acetate, and titanium isopropoxide as precursors, acetylacetone (2,4 pentanedione) as a chelating agent, and ethylene glycol as a solvent. The synthesis procedure was optimized by systematically varying acetylacetone: Ti and H2O:Ti molar rat...
متن کاملPreparation of nanocrystalline TiN coated cubic boron nitride powders by a sol-gel process.
Cubic boron nitride (cBN) particles coated with 20 wt% nanocrystalline TiN were prepared by coating the surface of cBN particles with TiO2, followed by nitridation with NH3 gas at 900 degrees C. Coating of TiO2 on cBN powders was accomplished by a sol-gel process from a solution of titanium (IV) isopropoxide and anhydrous ethanol. An amorphous TiO(x) layer of 50 nm thickness was homogenously fo...
متن کاملPreparation of Silica by Sol-Gel Method Using Formamide
In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolith...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Materials Science and Engineering
سال: 2017
ISSN: 2572-889X
DOI: 10.12783/dtmse/ammme2016/6914