Preparation of Ultrahigh-Molecular-Weight Polyethylene Tapes by Multiple Melt Processing

Grafting of Acrylamide to Low Density Polyethylene During Melt Processing

Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...

Graphene Oxide/Ultrahigh Molecular Weight Polyethylene Composites: Ball-Milling Preparation Mechanical Performance and Biocompatibility Effects

Graphene oxide (GO)/ultrahigh-molecular-weight polyethylene (UHMWPE) composites were successfully fabricated through the mechanical ball milling technology and processed according to the hot pressing method. The fractured microstructure features and mechanical properties of the GO/UHMWPE composites were investigated by Scanning electron microscope (SEM) and universal testing machine, respective...

Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology

Synthesis of high molecular weight polyethylene using FI catalyst

A FI Zr-based catalyst of bis[N-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(IV) dichloride was prepared and used for polymerization of ethylene. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature up to 35 oC were favorable for catalyst/MAO to raise the catalytic activity as...

Rheology and reptation of linear polymers. Ultrahigh molecular weight chain dynamics in the melt

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...