Preparation of Ultrafine TiCN Powders by Mg-reduction of Metallic Chlorides
نویسندگان
چکیده
منابع مشابه
Synthesis of HfB2 Powders by Carbothermal Reduction
In this research, solid state carbothermal synthesis of HfB2 Nano powders was investigated. For this purpose, HfO2,H3BO3, carbon active or phenolic resin were used as raw materials for carbothermal reaction. After 2-4 hours of milling the raw materials by a planetary ball in an ethanol media, the mixture was heat dried and pressed in to disks under pressure of 20-30 bar. The disks were then pla...
متن کاملFacile preparation of metallic triflates and triflimidates by oxidative dissolution of metal powders.
Various metallic triflates and triflimidates were prepared by the straightforward oxidative dissolution of the corresponding metal powder in DMSO under an atmospheric pressure of O2 in the presence of stoichiometric amounts of triflic or triflimidic acid.
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولPreparation of Ultrafine CVD WC Powders Deposited from WCl6 Gas Mixtures
Ultrafiie WC powders were produced from WCla-C3Hs-H2 gas mixtures in a conventional tubular hot-wall downstream CVD reactor. At reaction temperatures between 1100 and 1550°C powders containing W, WZC, WC and carbon were produced. The overall chemical compositions of the tungsten coinpounds as well as the free carbon contents depended strongly on the reaction temperature and the ratio of the rea...
متن کاملPreparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method
Gd2O3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. First, Gd(OH)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (PC) mode. The deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. The electrodeposited precursor was the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Powder Metallurgy Institute
سال: 2009
ISSN: 1225-7591
DOI: 10.4150/kpmi.2009.16.2.098