Preparation of ultrafine LiTaO3 powders by citrate gel method
نویسندگان
چکیده
منابع مشابه
Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method
Gd2O3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. First, Gd(OH)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (PC) mode. The deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. The electrodeposited precursor was the...
متن کاملSynthesis and Characterization of Carbon Nanotubes Decorated with Magnesium Ferrite (MgFe2O4) Nanoparticles by Citrate-Gel Method
In the present work, magnetic nanocomposites of the multi-walled carbon nanotubes (MWCNTs) decorated with magnesium ferrite (MgFe2O4) nanoparticles were synthesized successfully by citrate-gel method. The shape, structure, size, and properties of the as-synthesized sample were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction pattern (XRD), transmission electron...
متن کاملMorphology investigation of alumina nano-powders prepared by a sol-gel combustion method
Highly sinterable alumina nano-powders have been synthesized by a sol-gel combustion method with glycine asfuel. The preparation involved the thermal decomposition of a chelating agent (fuel)-nitrate gel and theformation of amorphous precursors. The nanopowders calcined at 1100°C were characterized by X-ray powderdiffraction (XRD) and Scanning Electron Microscopy (SEM). It was found that the ch...
متن کاملPREPARATION AND SINTERING OF W-20%Wt Cu COMPOSITE POWDERS PRODUCED BY CO-PRECIPITATION METHOD
Abstract: materials can be fabricated by sintering of W-Cu composite powders. In this research W-20%wt Cu composite powderswas synthesized via a co-precipitation method. Precipitate obtained from a mixture of copper nitrate and ammoniumparatungstate (APT) in distilled water contained W-Cu compounds. This precipitate was washed, dried and calcinedat 550 of dried precipitate powder was determined...
متن کاملPreparation of nanocrystalline TiN coated cubic boron nitride powders by a sol-gel process.
Cubic boron nitride (cBN) particles coated with 20 wt% nanocrystalline TiN were prepared by coating the surface of cBN particles with TiO2, followed by nitridation with NH3 gas at 900 degrees C. Coating of TiO2 on cBN powders was accomplished by a sol-gel process from a solution of titanium (IV) isopropoxide and anhydrous ethanol. An amorphous TiO(x) layer of 50 nm thickness was homogenously fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2005
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02711224