Preparation of Ultrafine C/N Controled TiCxNyPowders by Magnesium Reduction
نویسندگان
چکیده
منابع مشابه
Preparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method
Gd2O3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. First, Gd(OH)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (PC) mode. The deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. The electrodeposited precursor was the...
متن کاملMechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy
The application of magnesium alloys is greatly limited because of their relatively low strength and ductility. An effective way to improve the mechanical properties of magnesium alloy is to refine the grains. As the race for better materials performance is never ending, attempts to develop viable techniques for microstructure refinement continue. Further refining of grain size requires, however...
متن کاملPreparation of PVP/PLLA Ultrafine Blend Fibers by Electrospinning
The Polyvinylpyrrolidone (PVP) / Poly (L-lactic acid) (PLLA) ultrafine blend fibers have been prepared for the first time by electrospinning. Trichloromethane was found to be the co-solvent for electrospinning. The PVP/PLLA blend solutions in various ratios were studied for electrospinning into ultrafine fibers. The morphology of the fibers was shown by scanning electron microscope (SEM). It wa...
متن کاملpreparation of gd2o3 ultrafine nanoparticles by pulse electrodeposition followed by heat-treatment method
gd2o3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. first, gd(oh)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (pc) mode. the deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. the electrodeposited precursor was the...
متن کاملRecrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy
An ultrafine/nano grained AZ31 magnesium alloy was produced through four-pass ECAP processing. TEM microscopy indicated that recrystallized regions included nano grains of 75 nm. Pole figures showed that a fiber basal texture with two-pole peaks was developed after four passes, where a basal pole peak lies parallel to the extrusion direction (ED) and the other ~20° away from the transverse dire...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Powder Metallurgy Institute
سال: 2010
ISSN: 1225-7591
DOI: 10.4150/kpmi.2010.17.2.142